The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Integrated with Aim Point Laser (APL), the AM7515MZT1P eases the tasks of locating and focusing the target under the microscope. The AM7515MZT1P is a 5 MP microscope with a 70-140x magnification range featuring AMR, FLC, and a polarizer.
Integrated with Aim Point Laser (APL), the AM7515MZT1P eases the tasks of locating and focusing the target under the microscope. The AM7515MZT1P is a 5 MP microscope with a 70-140x magnification range featuring AMR, FLC, and a polarizer.
The Flexible LED Control (FLC) provides independent on/off control and light intensity level adjustment to the four LED quadrants, as well as the aim point laser. Without the hassle to stop and check the magnification for doing a measurement, the AMR detects the magnification rate automatically through the software, making the measurement be a more efficient, accurate, and pleasant process.
All necessary cables are included. USB models are powered by the USB connection, analog (direct to monitor) models include a power adaptor cable.
Software & drivers CD
A CD containing all necessary software and drivers to use the device. For computers without a CD drive, the software can be downloaded from the Dino-Lite website.
Calibration target
A target to be used for calibrating measurements.
Alternate end caps
A selection of swapable end caps for different applications. Included caps vary per model: Learn more
Alternate End Caps
AM7515MZT1P
N3C-O (9.5mm)
Standard Open Cap
For use when microscope is mounted in a stand to protect internal components.
N3C-E (12.5mm)
Contact Cap
For handheld operation. Microscope will focus at approximately 50x and 200x (except ZTL) when edge of cap touches surface.
N3C-C (9.5mm)
Sealed Cap
To protect the lens from small amounts of moisture and debris.
N3C-L (30mm)
Extended Cap
For handheld operation. Microscope will focus at approximately 30x (except ZTL) when edge of cap touches surface.
N3C-D (14mm)
Thin Diffuser Cap
To reduce small amounts of glare and improve lighting conditions, particularly with reflective subjects.
N3C-S (14mm)
Oblique Illumination Cap
To partially block built-in LED lights to produce side angle illumination.
Español
