Advanced Settings in DinoCapture 2.0 (DC20.ini)

Enable or Disable Advanced Settings in DinoCapture 2.0 using the DC20.ini File

Users can make changes to the most common DinoCapture 2.0 settings from within the software, however, some advanced settings can only be enabled/disabled by editing a configuration file called "DC20.ini" located inside DinoCapture's "Digital Microscope" folder. Follow the steps below to make changes to this file:

  1. Close DinoCapture 2.0
  2. Navigate to: "C:\Users*Username*\Documents\Digital Microscope\Setting"
  3. Open the file named "DC20.ini" in a text editor (i.e. Notepad).
  4. Locate and edit the settings of your choice.
  5. Save changes and close your text editor.
  6. Relaunch DinoCapture.

See example below DC20.ini configuration below:

[FRAME RATE]

Frame_Rate_Max_2011=30
Frame_Rate_Max_2111RX=30
Frame_Rate_Max_3X11=30
Frame_Rate_Max_3X11RX=30
Frame_Rate_Max_313=30
Frame_Rate_Max_3X13=30
Frame_Rate_Max_3X13RX=30
Frame_Rate_Max_413=30
Frame_Rate_Max_4X13=30
Frame_Rate_Max_4X13RX=30
Frame_Rate_Max_4115=30
Frame_Rate_Max_4515=30
Frame_Rate_Max_4815=30
Frame_Rate_Max_4915=30
Frame_Rate_Max_4X17=30
Frame_Rate_Max_7013_1.3M=15
Frame_Rate_Max_7013_5M=10
Frame_Rate_Max_7013RX_1.3M=15
Frame_Rate_Max_7013RX_5M=8
Frame_Rate_Max_7X15_1.3M=25
Frame_Rate_Max_7X15_5M=10
Frame_Rate_Max_73X15_1.3M=45
Frame_Rate_Max_73X15_5M=15
Frame_Rate_Video_Recording=20



[CAMERA PREVIEW WINDOW CONTROL]

Click_Frame_To_Capture=on
Save_Preview_Window_Position=on
Save_Annotation=off



[GLOBAL FUNCTION]

Output_Crosshair_XY_To_Clipboard=0
Continuous_Measurement=0
Measurement=on
Drawing=on
Annotation=on
Auto_Update=on
Hotkeys=on
ShortCuts=on
SaveAsDPI=96/180/240/300
Video_Timestamp=Off,FFFFFF
Timestamp_Format=0
;0 = YYYY:MM:DD MM:SS
;1 = YYYY:MM:DD MM:SS.s
;2 = YYYY:MM:DD MM:SS.ss
;3 = YYYY:MM:DD MM:SS.sss
Audio_Recording=off
Max_Zoom_Ration=4
;(2,4) if Max_Zoom_Ration=4,measurement/drawing is unavailable
WiFi_Enabled=on
Fullscreen_Mode=off



[DISPLAY AND SOUNDS]

View_Image_List=on


[WINDOW COORDINATION]

DC_Main_Form_Top=-9
DC_Main_Form_Left=-9
DC_Main_Form_Height=1060
DC_Main_Form_Width=1938




[IP CAMERA SERVER]

Server1=off
Server2=off
Server3=off
Server4=off
Server1_Password=
Server1_Port_Num=43521
Server2_Password=
Server2_Port_Num=43522
Server2_Left=210
Server2_Top=100
Server3_Password=
Server3_Port_Num=43523
Server3_Left=210
Server3_Top=100
Server4_Password=
Server4_Port_Num=43524
Server4_Left=210
Server4_Top=100
Server1_Left=738
Server1_Top=362



[IP CAMERA CLIENT]

Client1=off
Client2=off
Client3=off
Client4=off
Client5=off
Client6=off
Client7=off
Client8=off
Client9=off
Client10=off



[DRAWING DEFAULT SETTING]

Color_Text=0000ff
Color_Line=ff0000
Color_GridLine=0000e1
Color_Line2=
Size_Text=12
Width_Line=1
Drawing_Save_Last_Setting=on



[MEASUREMENT PROPERTY]

Distance_Line=DL
Continuous_Line=ML
Point_To_Line=PL
Polygon=PG
Radius_Circle=RC
Diameter_Circle=DC
Three_Points_Circle=TC
Three_Points_ARC=AR
Three_Points_Angle=TA
Four_Points_Angle=FA
Circles_Center_Distance=CC
Fixed_Line=FL
Lasso=LS
Color_Average=CLA
Fixed_Angle=SA
Edge_Tracing=PG




[AUTO MAGNIFICATION READING]

AMR_Disable=off


[BARCODE READER SETTING]

Barcode_Enable=0
;0=off, 1=on, 2=disable anyway
Barcode_Detect=
;0=detect always, 1=detect when microtouch pressed


Send_Result_To_Clipboard=0
Send_Result_To_Active_Window=0
Ignore_Repetitive_Data=0


Barcodes_Qty_To_Read=1
Scan_Spacing_Pixels=10
Threshold_Mode=Automatic
Threshold=40
Quiet_Zone_Size=Normal
Scan_Period_Seconds=3


Type_Code11=1
Type_Code39=1
Type_Code39Ext=1
Type_Code93=1
Type_Code128=1
Type_Codabar=1
Type_Inter2of5=1
Type_PatchCode=1
Type_EAN13=1
Type_EAN8=1
Type_UPCA=1
Type_UPCE=1
Type_Plus2=1
Type_Plus5=1
Type_Postnet=1
Type_Planet=1
Type_RM4SCC=1
Type_AustraliaPost=1
Type_IntelligentMail=1
Type_PDF417=1
Type_DataMatrix=1
Type_QRCode=1
Type_MicroQR=1
Type_PharmaCode=1


Scan_Top_To_Bottom=1
Scan_Bottom_To_Top=1
Scan_Left_To_Right=1
Scan_Right_To_Left=1


Checksum_Code11=0
Checksum_Code39=0
Checksum_Code93=0
Checksum_Inter2of5=0


Process_Image_Invert=0
Process_Image_Despeckle=0
Process_Image_Erode=0
Process_Image_Dilate=0
Process_Image_Sharp=0


[EDOF]

MaxStep_ManualEDOF=30