Edge Series Interchangeable Caps

N3C-O
Standard Open Cap (9.5mm)
Eases the task of finding and holding a fixed focus when using the Dino-Lite in handheld mode.
N3C-E
Contact Cap (12.5mm)
For handheld operation. Standard Working Distance models will focus at approximately 50x and 200x when edge of cap touches viewing subject.

Approximate focus when used with high magnification models:
MT4: ~450x
MT8: ~730x
N3C-C
Sealed Cap (9.5mm)
To protect the lens from small amounts of moisture and debris.
N3C-L
Extended Cap (30mm)
For handheld operation. Microscope will focus at approximately 30x (except ZTL) when edge of cap touches surface.
N3C-D
Translucent Diffuser Cap (14mm)
This is a translucent cap that partially softens the LED light.
N3C-D2
Opaque Diffuser Cap (14mm)
This cap softens and evenly distributes the LED light.
N3C-S
Oblique Illumination Cap (14mm)
To partially block built-in LED lights to produce side angle illumination.

Included Caps

ModelsTypeCS-41 N3C-O N3C-E N3C-C N3C-LN3C-D & N3C-D2N3C-S
AM/AF 4115, 4515, 4517, 4915, 4917, 7115, 7515, 7915, 73115, 73915Standard Models ZT, ZTL, MZT, MZTL, ZTW
AM/AF 4115, 5216, 5218, 73115Extra Long WD TF, ZTF, MTFXXXXXX
AM/AF 4115, 4515, 4517Ultraviolet FVW, FUW✓ (N3C-LB)
AM/AF 4115, 4515Infrared FJT, FIT, FKTXXX
AM/AF 4515, 7515, 73515High Mag T4A, T5, T8, T8A, ZT4XXX
AM/AF 4115, 4515, 4117, 4517Fluorescent CFVW, GFBW, GRFBY, YFGW, RFYW, DFRW, FVTXXXXXX
AM 5212, 5216, 5218Analog (TV) Models, NZT, MNZT, ZTWX
*CS-40/CS-41 Calibration target not included with non-USB models

Gallery

Compare Products

Request a Quote

Please use our request form below.

Our team will reply shortly.